What is a Brad Nailer?

0
203
Brad Nailers

A brad nailer is a single type of finishing nailer. It is used to fire 18 gauge clots normally used in trimming, for example the mounting of crown crownmolding. For trimming, Brad nails use tiny 18 gauge clocks which, once they have sunk in the wood, have a very small diameter and little or no visible trace of their existence.The small size of the nails prevents the cuts, panels and crown molding from splitting and are easier to dissimulate or not even require any dissimulation. If you want to do some trimming, like panel installation or the installation of coronation moldings, you need a brad nail gun.

Best Brad Nailers:

In addition to the apparent differences in type and brand, many other factors distinguish between different brads. Three top brad nailers are shown below:

Wen 61721 Brad Nailer

  • Nail Size: 3/4 – 2 inches
  • Power Source: Pneumatic
  • Weight: 3 lbs

This brad nailer operates at pressure rates between 60 and 100 PSI and is equipped with a standard NPT air inlet (1/4-inch) to ensure its use with nearly any air compressor or tube.

Hitachi NT50AE2 Brad Nailer

  • Nail Size: 5/8 – 2 inches
  • Power Source: Pneumatic
  • Weight: 2.2 lbs

The Hitachi NT50AE2 is a great choice, because it can be for bump and contact fire modes, as you work on different types of projects requiring different nail-fire mechanisms.

Porter-Cable BN200C Brad Nailer Kit

  • Nail Size: 5/8 – 2 inches
  • Power Source: Corded-electric
  • Weight: 1.24 lbs

Mid-price brad nailers like porter cable BN200C help balance the cost and operation of the nailer perfectly.

FAQs:

Should I get a brad nailer or finish nailer?

The main difference between the best brad nailer and the nailer finish is that it shoots 18-gauge nails, while the nail finisher uses 16-gauge and 15-gauge nails. On the contrary, for most carpentry and woodwork jobs a finishing nailer is what you can use if you may want to masticate the hole.

What can you use a brad nailer for?

A nail arm is a specialized nailer designed for the purpose of timbering, molding, cabinetry and a variety of hobbies and projects in small or detailed wood applications. Brad nailers are intended for the use of fire brades, which are essentially a thin nail ideal for binding lightweight wood trims.

Should I get a 16 or 18 gaugenailer?

The most versatile nail type to be used is a 16 gauge. It can penetrate and hold thick plates permanently in position. If you are willing to attach the trim mould and other delicate parts, you must have an 18-gage brad nailer only. “The 18-gage attachment is less than the 16-gage attachment.

Can you use a brad nailer for paneling?

In large projects, nail weapons save an incredible amount of time. A brad nailer is intended for precision work also called a tacker or stapler. They are well suited for the use in craft projects and projects, in which surfaces, such as wall paneling, cannot be finished further.