Washing machine repairs are usually carried out by technical specialized in this type of appliance such as fix-appliances.com. A washing machine is a very complex device, which is why its fixes require specific technical knowledge, both to detect the fault and to solve it.
Fixes in the washing machine are usually very reliable. These machines have a long useful life, in fact most washing machines work at full capacity for more than a decade, if we carry out repairs with quality parts, we will be prolonging their useful life, thus avoiding investing in a new appliance.
Table of Contents
- 1 Washing Machine Repair Services; When we Feel Need for this?
- 2 At fix-appliances.com we Care About you
- 3 How do we Detect the Failure of our Washing Machines?
- 4 Common Washing Machine Breakdowns
- 5 1. The Washing Machine does not Start
- 6 How to Repair it?
- 7 2. The Washing Machine Stops
- 8 How to Repair it?
- 9 3. Problems with Water Loading
- 10 How to repair it?
- 11 4. Spinning Problems
- 12 How to Repair it?
- 13 5. Makes too Much Noise
- 14 How to Repair it?
Washing Machine Repair Services; When we Feel Need for this?
Whenever the washing machine shows signs of failure, it is best to contact the manufacturer’s technical service or a reputable repair company. Whenever you detect a fault, check the appliance’s warranty. If the warranty is still valid, do not manipulate any of its parts and contact the manufacturer directly.
At fix-appliances.com we Care About you
The best way to avoid any breakdown in the washing machine is by performing proper maintenance on it. Even so, there are breakdowns that cannot be avoided, they just happen and usually at the worst possible time. At fix-appliances.com we know that looking for a good repair company or a technician can be complicated and due to the urgency of the repair, any option may seem good. You only have to call us and in less than 2 hours the technician will be at your home, every day of the year at any time (24/7).
How do we Detect the Failure of our Washing Machines?
It depends on the type of fault in question, detecting it can be very easy. Sometimes water stagnates in the drum, other times an excessively loud noise is generated during spinning, a motor problem can lead to the sudden stop of the washing machine. All these signs are very obvious and indicate that it has been altered correct operation of the washing machine. Below we analyze the most common problems:
Common Washing Machine Breakdowns
Many different problems can occur in our washing machine and with very different solutions. Below we analyze the most common problems:
1. The Washing Machine does not Start
This is one of the most common problems. Starting problems can stem from a lack of voltage, a saturation in the filter, problems with the closing of the door or a lack of water coming from the pipe.
If the washing machine does not start and we are not able to perceive the problem, it is best to call a specialized company immediately.
How to Repair it?
As we say, there are many problems that can cause a washing machine not to start, to repair this fault it will be essential to analyze the general condition of the washing machine and carry out the necessary repair so that it works again without problems.
2. The Washing Machine Stops
It is less common than the previous case, but it can also happen that the washing machine starts and, after a short time, stops. This is usually a sign that some of the washing processes are not working properly, in most cases the problem is usually water.
How to Repair it?
Check your washer’s water supply, plumbing, and water injection systems. Another check that you should do is the filters, if they have become saturated during the wash it is possible that the wash cycle has stopped. If you cannot find the reason for the problem, contact a technician or a specialized company.
3. Problems with Water Loading
The water load is another of the classic problems that require a professional fix. As we saw in the previous point, sometimes an obstruction in the pipe or in the joint rubber causes a problem with the water load. Other times it is the washing machine’s own devices that cause the lack or excess of water. If you perceive problems with the water load, contact a repair company immediately.
How to repair it?
The repair depends on each case. If it is a simple obstruction, it will be enough to remove the elements that make loading difficult, if the problem is in the washing machine itself, surely some of the parts that dose the water for washing will have to be renewed. The renovation will have to be carried out by a repair technician.
4. Spinning Problems
If there is a problem in the drum, we usually notice it during spinning. During this time the drum rotates at high speed and, therefore, the washing machine works at full power, if a fault occurs in the drum area, the spinning will be faulty and is usually perceived with the naked eye, as its power and result varies. (clothes come out soaked).
How to Repair it?
The most common is to disassemble the drum and analyze both this part and the joints. Sometimes the problem can come from the engine and affect the drum. As you may have deduced, this repair and check must be done by a specialized technician, to avoid more serious damage to both the washing machine and your home.
5. Makes too Much Noise
This is another very common problem, the washing machine begins to make noises that we did not perceive before. This is usually a sign of an internal system failure. As for example, the filter, the drain, the friction of the drum or one of the bearings are usually the causes that cause a washing machine to generate excess noise during its operation.
How to Repair it?
In order to proceed with the repair, we have to identify the source of the noise, for this we must disassemble the washing machine and check the drain. Again, this check and subsequent repair must be carried out by a company specialized in repairs.
Read Also :