Samsung Dryer Not Heating: Troubleshooting At Your Fingertips

0
125
Samsung Dryer Not Heating

Are you looking for the reason why the Samsung dryer is not heating? Well, let me tell you that you are not the only person with this query. In fact, it is common for Samsung heaters as well as any other heater, to have such an issue. But have you ever wondered as to what might be the cause of the issue?

Furthermore, if you happen to know the cause, do you know that the issue has several solutions as well? Here we must inform you that if your Samsung heater is experiencing such a heating issue, then you must know about the causes as well as the solutions. In fact, before troubling a technician, there are some troubleshooting steps that you can perform to fix the problem yourself. Therefore, without further ado, jump into the article as we take you through all the necessary steps. 

Samsung Dryer Not Heating

Here’s The Troubleshooting For You

Burnt Thermal Cut-off Fuse

Do you know that a thermal cut-off fuse in heat-generating equipment, like a Samsung dryer, prevents overheating by sacrificing itself? Well, that’s true. However, let me tell you that this fuse can itself become a villain if it melts due to overheating. Now, if you ask me what causes this overheating, then let me tell you that it is often caused by blocked vents, leading to the ignition of the thermal cut-off fuse. 

If you wish to fix this issue, you must know that these fuses are disposable. In fact, if you find that the fuse has melted, then simply replace it with a new one. Always remember to turn off the power first. Then, reach out to your user guide and wait for the heater assembly to cool before replacing it. While fixing the symptoms, cleaning the dryer vents regularly is crucial to prevent overheating. 

Checking The Gas Valve Solenoid and Igniter

To troubleshoot a gas-powered Samsung dryer, you must remember to check the gas valve solenoid and igniter. Well, it is really necessary to ensure that the gas ignites with the igniter on. Now, simply replace it if there’s no continuity. Now, what to do if the igniter glows but the gas won’t light? That is simple too. You need to replace the gas valve coils. However, if the issues persist after replacements, change both components. Here we must remind you that you need to handle the cooled heater assembly and replace the blown fuse. 

Flame Sensor:

You might be stunned to know that a malfunctioning flame sensor in a gas-powered dryer can lead to heating failure. Well, if you wish to fix it, simply unplug the dryer, access the flame sensor by removing panels, and test its continuity. Now, replace the sensor if continuity is lacking.

Defective Heating Element:

Well, if you wish to check the heating element’s functionality then simply use a multimeter or visual inspection. Now, replace it if the resistance is around 10 Ohms. Here we must remind you that the power should be disconnected before accessing and replacing the heating element.

Clogged Lint Filter:

If you wish to clean the clogged lint filter after each cycle to prevent airflow obstruction, then that can solve the issue. Thus, it is essential to ensure the dryer heats up properly. Simply remove the lint accumulation and conduct a test cycle for verification.

High-Limit Thermostat:

You must check the high-limit thermostat’s continuity using a multimeter. If you locate a problem, then simply change it if continuity is absent after confirming other components are working correctly.

Check the Air Vent Line:

You must remember to clear debris from the vent system and lint filter regularly to maintain proper airflow. Here you must know that this helps in preventing overheating and ensuring effective heating.

No Gas:

You also need to confirm that the gas valve is on and the gas pipe is connected. Moreover, we must remind you to ensure that the gas bill is paid to rule out a lack of gas causing heating issues in a gas dryer.

Faulty Drive Motor:

Let me inform you that a broken centrifugal switch on the drive motor can prevent the heat cycle. Well, that might result in a lack of heat. Just replace the motor, as switches are often not sold separately.