Find easy replacement directions for your Brother toner cartridge and drum unit with this whole guide. If you have got ne’er replaced the toner cartridge or drum unit in your Brother printer support before, you would possibly realize the method a touch discouraging. during this fast guide, we’ll show you the way to put in each for a few of in style Brother optical device printers.
Trust us, it’s easier than it looks! Installation steps will vary slightly looking on the printer and also the expendable you’re commutation however the method is pretty easy once you have got the associate understanding of however the toner and drum unit work. Let’s begin by reviewing the particulars of every expendable therefore you recognize precisely what you’re fitting your printer…
A quick introduction to Brother toner cartridges and drum units!
The toner cartridge and drum unit work along to provide a print. The toner cartridge is that the instrumentality that holds the toner powder and also the drum unit is associated electrically charged cylinder that transfers that toner powder to paper to make text and pictures. Brother sells the toner cartridge and drum unit as 2 separate consumables. The cartridge is intended to suit into the drum and each ar put in along united unit into your printer:
Toner will be offered during a normal yield, high yield, and further high yield cartridge size. The high yield and further high yield cartridges typically price a small amount a lot of however print a lot of pages for a far better overall worth. Not all Brother printers supply an additional high yield choice, therefore, take care to consult your printer manual to verify what’s acceptable for your machine. The drum unit is sold-out in exactly one size and is compatible with any of the antecedently mentioned cartridge sizes. each the toner and drum eventually have to be compelled to get replaced, however, the toner cartridge is often the primary to travel.
When do I replace a toner cartridge?
A toner cartridge needs replacement when it reaches the quoted page yield, or the approximate range of pages you’ll print with a particular cartridge (more regarding page yield here). you’ll realize the cartridge page yield on the facet of the cartridge box or on the specifications page of the printer manufacturer’s website. Your printer can allow you to comprehend it is time to interchange the toner with a “toner low” or “replace toner” message on the printer show.
When do I replace a drum unit?
The drum unit is intended to last longer and customarily must get replaced when the employment of 3-4 toners. Brother keeps track of the drum life by investigation the number of rotations of the drum. once a drug reaches the preset rotation limit to the connected page yield, a “drum life finish soon” message can seem on your printer’s show. If you’re putting in a brand new drum unit for the primary time, you’ll have to be compelled to reset the drum counter to restart the rotation forecast your printer.
Now that you simply ar conversant in the fundamentals, let’s begin the installation process! Here we are going to show you the way to put in the toner cartridge, the drum unit and reset the drum counter for variety of recent Brother optical device printers. We’ve broken out the installation directions by printer list and their compatible consumables.
Before installation, you’ll have to be compelled to homework your new cartridge or drum unit for the printer.
How to homework your toner cartridge
- Unbox the new cartridge
- Remove the cartridge from the packaging
- Remove the orange protecting clip from very cheap of the cartridge
- Over a waste bin, pull the seal tape out of the facet of the cartridge. The tape ought to set out in one long strip and might be discarded when removal.
- Now you’re able to install!
How to homework your drum unit
- Unbox the new drum unit
- Remove the drum unit from the packaging
- Remove the orange protecting clip encompassing the drum unit
- You are equipped for installation!
- First up, we’ll reassess installation directions for TN-630 / TN-660 toner cartridges and also the DR630 drum unit. These consumables work with all of the subsequent printers:
- How to Replace TN630 / TN660 Toner Cartridges
- Turn on the printer and open the front cowl.
- Remove the toner cartridge and drum unit from the printer.
- Release the toner cartridge from the drum assembly by pushing down on the inexperienced lock lever on the left facet of the unit.
- Unbox the new toner and take away the orange protection.
- Slide the new toner into the drum assembly, therefore, it clicks into place.
- Install the whole unit into the printer and shut up the front cowl.
- Replacing a DR630 Drum Unit
- Turn on the printer and open the front cowl.
- Remove the toner cartridge and drum unit from the printer.
- Release the toner cartridge from the drum assembly by pushing down on the inexperienced lock lever on the left facet of the unit.
- Unbox the new drum unit.
- Slide the toner into the new drum assembly, therefore, it clicks into place.
- Install the whole unit into the printer and shut up the front cowl.
- Reset the DR630 Drum Counter
- Open the front cowl
- Press and hold “Ok” for two seconds
- Press the up arrow or “1” to reset the counter
Next, we’ll review installation directions for TN-730 / TN-760 toner cartridges and also the DR-730 drum unit. These consumables work with all of the subsequent printers:
How to Replace TN-730 / TN-760 Toner Cartridges
- Turn on the printer and open the front cowl.
- Remove the toner cartridge and drum unit from the printer.
- Release the toner cartridge from the drum assembly by pushing down on the inexperienced lock lever on the left facet of the unit.
- Unbox the new toner and take away the orange protection.
- Slide the new toner into the drum assembly therefore it clicks into place.
- Install the whole unit into the printer and shut up the front cowl.
- Replacing a DR-730 Drum Unit
- Turn on the printer and open the front cowl.
- Remove the toner cartridge and drum unit from the printer.
- Release the toner cartridge from the drum assembly by pushing down on the inexperienced lock lever on the left facet of the unit.
- Unbox the new drum unit.
- Slide the toner into the new drum assembly, therefore, it clicks into place.
- Install the whole unit into the printer and shut up the front cowl.
- Reset the DR-730 Drum Counter
- Before resetting the drum, make certain the machine is turned on and also the front cowl is closed.
- On the printer’s show, press “OK” and also the up arrow at a similar time.
- Then, press “OK”to choose [Drum].
- Press the down arrow to reset the drum counter.
Next, we’ll review installation directions for TN820 / TN850 / TN-880 toner cartridges and also the DR820 drum unit. These consumables work with all of the subsequent printers: Canon printer support HL‑L5000D / HL‑L5100DN / HL‑L5200DW / HL‑L5200DWT / HL‑L6200DW / HL‑L6200DWT.
How to Replace TN820 / TN850 / TN880 Toner Cartridges:
- Turn on the printer and open the front cowl.
- Remove the toner cartridge and drum unit from the printer.
- Release the toner cartridge from the drum assembly by pushing down on the inexperienced lock lever on the left facet of the unit.
- Unbox the new toner and take away the orange protection.
- Slide the new toner into the drum assembly, therefore, it clicks into place.
- Install the whole unit into the printer and shut up the front cowl.
- Replacing a DR820 Drum Unit
- Turn on the printer and open the front cowl.
- Remove the toner cartridge and drum unit from the printer.
- Release the toner cartridge from the drum assembly by pushing down on the inexperienced lock lever on the left facet of the unit.
- Unbox the new drum unit.
- Slide the toner into the new drum assembly, therefore, it clicks into place.
- Install the whole unit into the printer and shut up the front cowl.
- Resetting the DR820 Drum Counter
- Every time you replace the drum, you’ll have to be compelled to reset the drum counter.
